Asymmetric macroeconomic determinants of energy intensity in China: does economic development matter?

Environmental Science and Pollution Research - Previously, several studies have tried to analyze the various determinants of energy intensity for different countries and regions. However, none of...     

The behavior of heavy metal release from sulfide waste rock under microbial action and different environmental factors

The dissolution of heavy metals from the waste rock is controlled by many factors. Herein, we investigated the release behavior of iron (Fe), chromium (Cr), copper (Cu), and zinc (Zn) from sulfide waste rock under the actions of microorganisms and different environmental factors (solution pH value, particle size of waste rock, temperature, Fe³⁺ concentration). The release quantity of heavy metals was negatively correlated with pH and particle size and positively correlated with ambient temperature and Fe³⁺ concentration. Under the experimental conditions of pH value of 3.0, temperature of 35°C, and waste stone particle size of less than 0.075 mm,, the release quantity of Fe, Cr, Cu, and Zn reached 3680, 18.32, 132.20, 26.60 mg·kg^?1 after 20 days of leaching, respectively. Rising the temperature to 45 °C, Fe, Cr, Cu, and Zn release quantities increased to 89.30, 5.81, 105.08, and 28.00 mg·kg^?1. Six hundred milligrams per liter Fe³⁺ increased the release of heavy metals considerably (2.63–65.48 folds). The presence of microorganisms can significantly facilitate the release of heavy metals. Compared to the control group, the release quantities of Fe, Cr, Cu, and Zn increased 4.29, 3.17, 1.54, and 2.39 times, respectively. In addition, the waste rock under microbial action was more seriously corroded than that under chemical factors. The release behavior of these four heavy metals was consistent with the interfacial chemical reaction control model, indicating that the reactions mainly occurred on the surface of the waste rock. This study provides an essential reference for the study of heavy metal leaching behavior.

     

Highly promoted phytoremediation with endophyte inoculation in multi-contaminated soil: plant biochemical and rhizosphere soil ecological functioning behavior

Environmental Science and Pollution Research - Rhizosphere soil ecological functioning behavior is of critical importance for regulating phytoremediation efficiency during microbial-assisted...     

海水石油类分析的影响因素

石油类是衡量海水水质的重要指标,海洋石油的首要污染源是原油泄漏,因此海水石油类的具体成分与原油成分基本一致,主要为弱极性的烷烃、环烷烃和芳香烃。在3种国标分析方法中,紫外分光光度法的应用最为广泛。采用该法分析时,建议统一选择HJ油标准作为标准溶液,透光率90%的正己烷作为萃取剂,标准曲线斜率在斜率控制图内的上下辅助限之内;萃取过程中调节水样p H值2,人工萃取时间120 s,萃取后不能立即分析时,在5℃冰箱内保存不超过2周。     

SPE-GCMS法分析饮用水源水中痕量半挥发性有机物

采用C 18固相萃取柱富集,乙酸乙酯、二氯甲烷和丙酮混合溶剂以1∶1∶1比例洗脱、自动固相萃取的前处理方法,气相色谱质谱连用,分析水源水中33种半挥发性有机物,并与液液萃取前处理方法进行比较。结果表明:在500~5 000μg/L范围内,33种SVOC线性良好,相关系数0.990,回收率为70.1%~114.2%,相对标准偏差为2.4%~13.4%,方法检出限为0.06~0.25μg/L;而且该方法较液液萃取,检出样品种类多。适用于饮用水源水中半挥发性有机物的监测。     

Coupled effects of fly ash and calcium formate on strength development of cemented tailings backfill

Environmental Science and Pollution Research - Cemented tailings backfill (CTB) is widely adopted to ensure the safety of underground goafs and mitigate environmental risks. Fly ash (FA) and...     

基于温度-压力双应力加速试验的NEPE推进剂寿命预估研究

目的 探索实际贮存状态NEPE推进剂自重产生的诱发压力对其贮存寿命的影响,开展温度-压力双应力作用下NEPE推进剂的寿命预估研究.方法 对比分析NEPE推进剂在加速老化试验过程中的失效机理,确定其老化失效模式以及老化失效参量,采用加速老化试验及力学性能测试,分析NEPE推进剂加速老化过程中力学性能的变化规律.基于不同温...     

南京台旧地电场地震例总结

根据南京台旧地电场地的十余年电阻率资料 ,讨论了电阻率变化与这一期间江苏发生的中强地震间的可能关系 ,分析了震前电阻率异常变化的主要特征。同时 ,对该台新、旧地电场地电阻率观测资料进行了对比分析 ,其结果也可供其他地电台参考